Home Page
About Us Page
Links Page
Contact Us Page
Forums Page
Users Pages
Guestbook Page
Search Site Page
Project Page
 
Home | Profile | Active Topics | Active Polls | Search | FAQ
Username:
Password:
Save Password
Forgot your Password?

 All Forums
 Main Area
 Australian Ham Chat Area
 3.776 - 3.800 DX Window
 New Topic  Reply to Topic Bookmark Topic
 Printer Friendly
Author Previous Topic Topic Next Topic  

vk3pa
Deceased

Australia
1714 Posts

Posted - 10 Mar 2008 :  12:19:04 PM  Show Profile  Visit vk3pa's Homepage  Reply with Quote
3.776 - 3.800 DX Window
NOTE: DX WINDOW
Emissions must not extend below 3776 kHz. "Therefore when using LSB, the suppressed carrier frequency
should be no lower than 3779 kHz"
from WIA band plan..
.
Last nite the question came up if working on 3.800, r we still in our band allocation?
Well for this reason I usally operate on 3799.80 so Iam below 3.800

" but" really I believe we can tx on 3.800 as our side band is on the low side..

. If we operate on the lower part of our allocated DX WINDOW 3.776 we would have our side band below 3.776!! this being the reason for not tx'n below 3.779.. the same thing happens when operating cw on all HF bands, if we use cw usb our carrier is above the botton end whereas lsb would put us below our allocated frequency!! well on 160/80/40m
Do u know where ur carrier frequency is on ur rig when using CW??

  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic Bookmark Topic
 Printer Friendly
Jump To:
Goldfields DX Amateur Radio Group © 2002 - 2022 Goldfields DX Amateur Radio Group Go To Top Of Page
This page was generated in 0.52 seconds. Snitz Forums 2000