|
vk3pa
Deceased
Australia
1714 Posts |
 Posted - 25 Feb 2009 : 09:39:43 AM
|
Simple , unplug power
remove covers from ur controler es look under for white cao(motor start) es remove wires from terms 4 es 8.these term's no longer required..
place cap near rotator motor es conect to term's 4 es 8 on rotator, after remoning controller wires from both 4 es 8..on rotator es controller..
u now only need 6 core controll cable.. auto trailer flex is gud..
makes sure cap is weather proofed es out of the wx....
reason for doing this, is so no IR loss or add cap es inductance by using two wires to feed the cap........
|
|
Need a bit more tourqe for ur cde rotator
